Staining soft maple

Recipe for Staining Soft Maple - FineWoodworkin

  1. One thing I often do with soft maple is to raise the grain BEFORE staining with water soluble dye. I sand to 150 grit then wipe the whole project down with a damp sponge, let it dry, then give a final sanding with 240
  2. For those of you who don't know, maple is a tricky wood to stain. It tend to absorb stain unevenly which leads to a blotchy look. By pre-sealing the wood with shellac, you can even out the color absorption. This is exactly what Darin was trying to do
  3. Bob Oswald replies: Soft maple tends to stain blotchy due to differences in grain density. A couple of products have worked well for me. Seal-A-Cell by General Finishes and Seal Coat by Zisner. Both are very thin, that is, well diluted products, so they tend to absorb deeply and quickly into the soft grains and not so in the hard grains
  4. When staining soft maple Kitchen doors and drawers from a millworks shop the painter applied a special walnut stain directly to the raw wood. The stain did not take well on wood milled with the grain, and on cross cuts the stain soaked into the wood giving a dark black color
  5. I am in the process of building and staining a Shaker Tall Clock. The wood is soft maple and on some test pieces I tried a dark mahogany stain, and a cherry stain. The mahogany is about what I want, but it has some blotchy places and the color varies radically from one place to another. I tried using a pre-stain conditioner (by Minwax) and it is a little better, but still not professional looking

The second, pigments, need some rough area to sit in. Speaking for myself, I never sand maple above 220 and rarely above 180 but that in and of itself will not be a problem. Start with a water-soluble dye stain (available at Rockler). It will give you deep color, but may bring out characteristics in the wood grain that you want to minimize The term soft maple is a bit of a comparative misnomer, as soft maple is harder than many other hardwoods (such as cherry). Soft maple is also often referred to as tiger maple for the tiger-like stripes in the wood, or curly maple if the stripes are a bit more of the curly nature. The key to evening out the stain is to sand the project.

Staining Maple - The Wood Whispere

Before staining or painting maple wood, you should create a mixture of linseed oil and turpentine in like proportions. Then, take an old towel and rub the entire surface of the maple wood that is to be painted with the mixture. Immediately take a dry towel and wipe off the excess and allow it to set in and try at least 12 hours before painting If you would add a little color, the soft parts of the wood would darken a little giving you the contrast you want. Unless you use a natural stain the stain alone might be more color than you want so diluting it with linseed oil might work for you. In the old days maple was stained with a stain with a reddish tint to it

I haven't had a lot of luck staining soft maple dark. Sure it stains, but I don't like the highlights and inconsistencies in the color. The finished product looks like some of that crap they used to stain all the mediterranean furniture they sold in the 60s-70s. In those days it was if it has highlights, put on another coat. Pine is the same way This week I done some more testing with stains, this time I tested them on Soft Maple wood. I hope this helps somebody that's looking to stain Maple. And may.. Soft maple will actually absorb stain, thus making it easier to get deep colors. If blotching is a concern, try a light seal coat to even it out. There's lots in the Knowledge Base about blotchy maple. Hard maple is difficult for stain to penetrate. You can get around that by water-popping hard maple before staining, or using a spray stain

Since maple is a hardwood, the stain could be blotchy or not absorb well unless it's pretreated. Use a natural bristle brush to apply a thin layer of pre-stain to your piece. Leave the pre-stain to soak into the wood for about 10-15 minutes before wiping off any excess with a clean shop cloth Wood sealer Some types of wood, like pine, cherry, birch and maple, are notoriously difficult to stain. A board that has a nice, attractive grain pattern can end up with dark, splotchy areas after you apply the stain. But there's a simple way you can prevent most stain blotches Wait, what? Hard maple, soft maple, what the heck is country maple and while we're at it PLEASE EXPLAIN curly maple, bird's eye maple, quilted maple, ambrosi.. Staining soft maple white. Thread Modes. Staining soft maple white. Bubapug Member. Posts: 46 Threads: 0 Joined: Dec 2001 #5. 10-06-2019, 12:23 PM.

Stain on Soft Maple Guild of New Hampshire Woodworker

stain is common in the wood of soft maple (Acer rubrum L.) (Fig. 2). The basic specific gravity of soft maple (0.49) is only slightly greater than that of ochoó (0.41), and both spe-cies are diffuse-porous, so we decided that soft maple would be a good species to study for insights into the origin an Less expensive than hard maple, birch is often substituted for maple in furniture and kitchen cabinets. But, like hard maple, birch wood does not absorb stain evenly and should not be stained with dark colored stains. When staining, first apply a pre-stain wood conditioner, then select stains lighter in color Hard maple is fine to work with but it is more dense, making brown maple a little easier to work with using machines or hand tools. Since soft maple is not as hard and stiff as hard maple, it resists warping and twisting better. The tight grain of hard maple can make it harder to stain than brown maple wood Hard maple does not absorb much stain, it mostly sits on the surface whereas soft maple absorbs stain quite well. You could try taking a sample of the wood to be stained (soft maple) and a sample of the stained hard maple to a reputable paint store for a colour match (not HD or that ilk but a real paint store ) 3. Stain Your Plywood. With prep work done and the correct stain selected, it's time to start the staining process. For a liquid stain, apply the first coat, using long and even strokes. If you're using a gel stain, instead apply the first coat with a cloth, rubbing the gel into the wood evenly as you go along

The Do's and Dont's of Staining Maple Cabinet Doors

  1. I can do soft maple in my budget and I was wondering if staining the wood would get anywhere close to the walnut. If so what type of stain gets the best results? The backup options are to try to make the contrasting wood a design feature somehow, but I can't think of a way to make it look good
  2. wax polyshades, they are horrible. An oil finish will pop the grain the best but you have to let it dry sufficiently before you put a glossy clear coat on it. Acrylic or Lacquer will give you a great glossy finish without too much yellowing but they don't pop the grain by themselves very much
  3. Apply a favorite stain for ash or maple to soft pine or spruce, and you may be surprised. Since the earlywood stripes often comprise the majority of the surface, the net result is a darker color than you had anticipated. Testing stain first on scrap samples of the softwood you use for your project will quickly show you what you'll end up with

Staining Soft Maple - sawmillcreek

Soft Maple Is Not Too Soft. Silver maple has a special place in my heart. It was one of the first trees I ever milled (I would say it was my first, but my memory isn't that good). It was a tree taken out by our neighbor and had a short trunk, only about 6′ long, and about 24″ in diameter. At the time I knew little about processing lumber. 10-27-2010, 06:38 PM. Re: Best way to finish Maple. first thing I am going to do is follow mr simpsons advice for a post in 2006, wet it down, let dry and sand to fix any damaged grains, will check it out again, and wet it again and sand Some types of wood, like pine, cherry, birch and maple, are notoriously difficult to stain. A board that has a nice, attractive grain pattern can end up with dark, splotchy areas after you apply the stain. But there's a simple way you can prevent most stain blotches. In this article, we'll show you how. Video: Tips for Staining Wood Evenly Staining poplar to match maple is an inexact art. Among other considerations, the color of the wood used influences the final appearance. Poplar heartwood displays a greenish-brown tint

maple; popular; A very common type of wood that beginners use is pine.It is a more affordable option but also widely available at hardware stores. Since pine is a softwood, the experts recommend using a wood conditioner before applying the stain. To answer our question, yes, a wood conditioner is necessary when applying stain to a soft. This post is sponsored by Minwax. We've been wanting to do a wood/stain study for years now and in my head, I wanted to do every type of wood with about 20 different stains each.But with limited resources (not to mention space), we settled on 5 popular species of wood commonly used by DIYers, with 6 different stains; 2 light, 2 medium and 2 dark The quartz countertop here, Blanco Maple from Silestone, has a subtle amber-colored aggregate in it that picks up on the glowing wood stain color. Cool it all down with a soft gray floor tile, such as StonePeak Ceramics' Parkland in Artic

Best Way to Stain Maple? - Woodworking Blog Videos

How to overcome staining problems on Hard Mapl

Soft maple will turn a translucent blue-black color. On hard maple, the surface turns greenish gray. Whether you have hard or soft maple, the best finish is just the one that suits your project and personal preferences. To preserve maple's light color, apply a non-yellowing, water-based finish. To bring out the pattern in bird's-eye. 3. Stain Your Plywood. With prep work done and the correct stain selected, it's time to start the staining process. For a liquid stain, apply the first coat, using long and even strokes. If you're using a gel stain, instead apply the first coat with a cloth, rubbing the gel into the wood evenly as you go along For that reason, ashwood takes stain well. For a better result, you can use pre-stain wood. Maple wood. Maple wood does not take stain well as its name implies. Hard maple is an extremely dense, tight-pored wood that does not absorb any stains. Unlike oak and ash, the grain pattern of maple is uneven, causing it to absorb stains in varying degrees Soft Maple is used to describe four other types of maple trees: Silver maple (Acer saccharinum), Red maple (Acer rebrum), Boxelder (Acer negundo) and Bigleaf maple (Acer macrophyllum). This kind of maple, as the name suggest, is not as hard or as strong, so it is not used for flooring, but is ideal for wood-worked décor items, furniture.

The Process of Staining Maple Wood Cabinets. Staining close-grained woods like maple and cherry presents a problem for the wood finisher, because they can absorb regular penetrating stains. Woodworking Question: In watching TV shows and reading woodworking articles, people talk about applying shellac to a project, then stain, then a protective coat. Why the shellac before the stain? Here's what our experts had to say. Answer From The Experts: Some woods, notably softwoods, tend to absorb more stain than people would like, often selectively, such as in the early wood bands as. Maple Vs. Birch. If you compare maple vs. birch, you will find that maple is the stronger and denser of the two types of wood. Maple stains better and you can apply a variety of finishes to it as well. Because it stains so well, you can make maple resemble expensive types of wood like cherry and mahogany

Soft Maple is suited to most of the same uses and looks very similar to hard maple. Soft Maple is similar in hardness to American Cherry. The heartwood is usually light reddish-brown, but sometimes darker. The sapwood is commonly white with a slight reddish-brown tinge. Botanical name: Acer saccharinum Follow this link to view all varieties of. Treating the surface with Pre-Stain Wood Conditioner helps prevent streaks and blotches by evening out the absorption of oil-based stains. It can be applied over any wood but is especially necessary when working with soft or porous woods like pine, alder, birch, and maple Give maple an aged look with dye and an oil/varnish mix. Sand to 220 grit, wipe off dust, then damp-sponge the wood and sand as above. Wipe on a dye stain to suit, and let dry. Then sand with a fine grit (320 or 440), remove dust, and add a coat of oil/varnish blend, wiping off the excess Red oak absorbs stain at an even rate and is typically free of blotching without extra surface preparation. Advertisement Soft Maple All of the soft maple varieties are softer than oak. Soft maple is typically reserved for carvings, knobs, handles, veneers and solid guitar bodies. It is also good for moldings and trim and can be used in. 5. Red Oak is an open pored wood vs. White Oak which is a closed pore wood. Using a pre-stain on red oak can help close the pores to reduce the stain absorbed. Here's a video by Bruce Johnson recommending pre-stain and he's working with Oak cabinets. He says it's best for pine and problem woods like aspen and alder

Tips for Woodworking With Mapl

6 Tips for Painting and Staining Maple Lumber

This item: General Finishes Oil Base Gel Stain, 1 Pint, Colonial Maple $22.05 Only 16 left in stock - order soon. Sold by Prime Tools and ships from Amazon Fulfillment Finishing Soft Maple: Takes stain satisfactorily and polishes well. Price Range: Mid Range . Back To The Top. Hard Maple. Hard maple is a very hard, close-grained wood that is heavy and dense. Hard maple has an off-white color with light hues of yellow-brown and pink. Hard maple occasionally contains small mineral streaking which gives the wood. Varathane 1 qt. Wood Conditioner is a pre-staining step made for use on interior wood projects before finishing with an oil-based stain. Varathane Wood Conditioner helps prevent splotchy, uneven staining on soft and porous wood types, including birch, maple, alder, fir and pine

Soft Maple: strong, hard, and medium density; paint grade. Grain: fine textured, close grained; Mahogany: varies in color between medium red to reddish brown. Grain: medium coarse texture, straight to interlocked grain; Beech: heavy, medium to hard, pale colored; stains and polishes well. Grain: tight and fine. Similar to birch and maple The above types of maple vary in strength, hardness, and weight, but all are softer than hard maple. Pros and Cons: White maple is a species of maple native to Eastern North America and is one of the most common trees in the United States. Its main advantage is that it can be stained to look much like cherry wood The maple is harder than birch and is a PITA to stain because of the hardness of maple . Birch is easier to stain and the stain penetrates more evenly , as opposed to the maple where the stain will become blotchy . I get around the blotchyness ( new word ) of maple by adding a little of the stain to the clear coat , about 10% max on the stain. The gel stain is thick like pudding, not a liquid. While gel stain does go on thick and sit on the surface of the wood, I found that you can still see and feel the natural wood grain beneath, unlike paint. With the oak cabinets, the grain was very evident post-staining. Gel stain will not require you to sand the product to a raw wood finish Soft maple might not be great if you wish to go stain in future though because it doesnt have much grain to make stains look nice. 't my area, both of these woods are priced about the same. I'm informed that prepping the wood is a significant process that, if done right, will help the wood accept the paint

Maple wood is available as hard and soft maple wood. Both are quite hard as compared to other woods and both are specifically used for certain applications. The soft wood is commonly used in furniture and molding very resilient and hence it used for durable purposes, such as a butcher block This process will give you the ideal staining surface. Soft wood is very porous so it may need a clear conditioner on it before you put on the stain so that it will partially block some of the wood pores. This will allow the stain to lay evenly on the surface and will leave you with an even finish. Wood conditioner should be used after sanding. Spalted maple is just ordinary maple that's partly rotten. After the wood is cut, different colonies of stain, mold and decay fungi attack it and establish boundaries to preserve their turf. That's what those black lines are—borders between warring tribes. They don't follow any regular pattern, such as the tree's growth rings Maple wood is incredibly strong, looks great, and stains nicely. Woodworkers and furniture aficionados gravitate towards maple for its light, creamy color, smooth grain pattern, and impressive durability. Although there are dozens of species of maple trees around the globe, the species most common among American woodworkers is Hard Maple (aka.

Opt for a gel stain for color that rests on the top of the wood. Gel stains don't penetrate the surface of the wood, meaning they bring out some of the wood's markings but mostly act as a layer of paint. They're great for types of woods that usually become splotchy when stains are added, like maple, pine, cherry, and birch Mineral stains are mostly the result of an injury or biological attack on the tree and no treatment is known. Typical discoloration in oak shows as dark-brown streaks, in maple as green or brown, and in poplar as purple to dark-red. Mineral stains do not affect the strength properties of the lumber

Some woods, such as oak and walnut, absorb liquid stain evenly. On pine, cherry, maple, poplar, and birch, however, spongy areas soak up more liquid—and more color—than dense areas. Any blotch-prevention program starts with evenly sanding to 180 grit on face grain, and to 220 grit on end grain. If you use a random-orbit sander, follow up by. Words like pine, cherry, birch, and maple are all known to be very hard to stain. A board that has an attractive again can end up with a dark blotchy area after you have applied strain on it. Whenever you have wood that has grains that are more open then that is also the place where these blotches often come up A fine-grained hardwood similar to cherry, birch, and maple. Pale yellow (tan) to reddish brown in color. A soft, light wood with even texture and straight grain that accepts stain well. Small ramdom tight knots and rays are at times present and help to give alder its unique character Finishing Hard Maple with a clear coat is the way to go for easy of application and beauty. Staining can be difficult as it does not absorb the stain evenly and will require you to have some tricks up you sleeve to get it right. We recommend that you consult your local paint shop experts for suggestions and advice

Since the veneer is very thin, you want to sand as little as possible. The stripper is used for removing the finish and stain - the sanding is just to smooth the any scratches. Using 150 grit sandpaper sand in the direction of the veneer grain. You want to be very careful not to sand through the veneer, so don't sand over one spot for too long It absorbs medium to dark stains well and its smooth surface is ideal for painted finishes. Choosing a lighter colored stain will best showcase the natural range of grain colors in Brown Maple, while a darker stain will blend the grain colors better. Durability. It is a softer hardwood so it is more prone to scratches and denting with heavy use Stain with Glaze Finishes. Available on Maple, Oak, Cherry, Birch and Hickory 1. A base stain is applied to the wood for consistent color coverage. A flood coat of glaze is then applied and hand-wiped, leaving behind soft tones in the corners and recesses of the door. Next, a highlight glaze is brushed into the corners and recesses by hand to. Soft Maple Overview. LATIN: ACER RUBRUM ORIGIN: NORTH AMERICA Soft maple is only slightly softer than hard, sugar maple. It is similar to Cherry and Walnut in terms of hardness. Soft maple is an excellent wood for many woodworking projects, including: Musical instruments, furniture, flooring, joinery, and cabinetry

Popping the grain on soft maple WITHOUT staining

Pre-Stain wood conditioner IS necessary for soft, porous woods such as pine. Dilution of the stain occurs slightly, but the darker appearance on the non-conditioned part of the wood is mostly due to uneven absorption. Apply the stain soon after applying the conditioner. All of the materials found here can be found at home improvement stores If you're looking for a versatile hardwood that works with a variety of kitchen styles and is highly durable, maple wood is a great option. Maple kitchen cabinets take a variety of stains and give any traditional or modern kitchen a sophisticated and inviting feel. Aesthetically, this hardwood also stands the test of time allowing you to refresh your kitchen's look throughout the years with. Another thing to be aware of is that with maple (especially hard maple) it is very difficult to get a very uniform color when staining the wood a darker color. It has a tendency to to become blotchy when stained. If you go with soft maple, it will take the stain more evenly, but on the other hand soft maple is not much harder than cherry Before applying stain to your wood floor, you need to know what species it is. Floors made of maple, birch, and coniferous woods (especially pine or fir) are all very difficult to stain evenly. Maple and birch are tight-grained woods with very small pores, and the density of the pore wall fibers varies drastically SOFT MAPLE WOOD. Soft Maple is mainly used as a good secondary lumber, but it is starting to come into its own for fine furniture and architectural millwork. It takes a stain well and can be finished to look a lot like Cherry. Soft Maple can produce a strong tiger figure pattern. Shop for Soft Maple

Good Dark Stain for Soft Maple? - HomeOwnersHu

Hard maple is a wonderful, expensive, nearly white wood used for almost every application imaginable both today and even prior to the colonization of the U.S. Uses include cabinets, furniture. Sep 28, 2017 - Explore ADR Flooring's board stained maple on Pinterest. See more ideas about maple wood flooring, wood floor finishes, maple wood Wood Conditioner refers to the pre-staining step for interior wood projects before the application of an oil-based stain finish. Varathane Wood Conditioner, for example, is one such product that prevents uneven staining on the surfaces of the soft and porous woods such as maple, birch, fir, pine, and alder. A Pre-Stain Wood Conditione

First, I used some homemade vinegar stain on the wood to cut the yellow/orange color of the pine. The homemade vinegar stain was about two cups of white vinegar, two 000 steel wool pads, and two tablespoons of coffee grounds. I only let the vinegar solution set for about three hours before using it The Basics of Hardwood Finishing Hardwood products are finished to enhance or alter the natural beauty of the wood, and to protect the wood from damage by moisture and handling. A quality finish must offer acceptable performance and also meet the project's aesthetic requirements. The Architectural Woodwork Institute has established specific finishing systems and provides [ Soft maple is another nice option. My local supplier also offers a paint grade cherry (extra sap and less appealing grain) at the same price as the maple. The cherry is nice for dimensional stability, if you're doing inset doors

Characteristics of Popular Wood Types - Official Blog of

Testing Stains on Maple wood - YouTub

Hard Maple. Baird Brothers premium Oak handrail is carried in stock. We can pre-finish your handrail with a clear finish or you can choose one of Baird Brothers seven stain colors. Custom handrail and other hardwood species such as Ash, Walnut, Hickory, White Oak, Mahogany, Brazilian Cherry, and Lyptus are available upon request.. Maple lumber can display convoluted grain patterns and differences in texture as well as a smooth, almost featureless grain. The resulting variety in porosity can cause problems when you stain the wood. Some species of maple are soft, but hard maple is one of the hardest domestic hardwoods, and can be difficult to work with. A few tips can help. Some blotching may occur when staining, but a more even color is achievable by using a pre-conditioner, gel stain, or toner prior to staining. Hard maple creates a beautiful and strong staircase, but can also be used for flooring, musical instruments, cutting boards, butcher blocks, baseball bats, turned wood objects, and custom wood projects Old Masters Gel Stain is a highly pigmented, oil-based stain designed to achieve intense colors on interior and exterior wood, fiberglass, primed metal, and composition surfaces. Its thick formula allows easy application and superior color control, necessary to achieve a rich and uniform color on most surfaces in a single application. Gel Stain is especially recommended for woods such as pine.

Get ultra-fast results and rich, even color with Rust-Oleum® Wood Care Ultimate Wood Stain. This innovative formula creates a beautiful wood patina and completes projects 75% faster than competitive products. Great for indoor furniture, floors and more Maple, also referred to as hard maple, sugar maple, or rock maple, dimensional hardwood lumber is ready for your craftsmanship to be made into cabinets, furniture, trim, or your own special project. If you require a hardwood species not listed, or to purchase lengths longer than 12' please call us at 1-800-732-1697 or email. Sizes shown are net The term soft maple refers to several species of maple with similar hardness to cherry; hard maple refers to a single species that is stronger. However, hard maple is much more difficult to stain than soft maple. How Much Do Maple Cabinets Cost? The same pricing rules apply to maple cabinetry - the price varies greatly depending on the size of. Roasted maple necks cost more than unroasted. Typically, roasted maple sells at a premium of 50-100% over unroasted maple. Thus, the actual upcharge may be $50-$150. However, the up-charge is often a bargain. The main reason is that increased stability means easier and longer lasting set ups

The three most common types of interior wood stains are water-based wood stains, oil-based wood stains and gel stains. Each of these will enhance the natural grain of your wood tables, cabinets or other projects. Oil-based stains are probably the most common type of stain and are frequently used for large projects This is a pre-stain, clear wood sealer that enables uniform stain application on soft woods, such as fir, pine, or hemlock. Using this product helps to avoid the appearance of uneven, blotchy staining. This VOC-compliant formula is for Ozone Transport Commission (OTC) states and the South Coast Air Quality Management District. This formula may be open for a longer amount of time before stain. Hard Maple is not commercially available from the South. Color Specifications: Unselected, #1&2 White, Sap 1 Face, Brown. Grade: NHLA Standard Grade Rules. Defects to consider: Sticker stain, stain, pinking (dark board cores), heart checking. Alternatives: Soft Maple, White Birch, Yellow Birch, Beech. Shipping Weight: Kiln Dried 4190 lbs/MBF.

Hard or Soft Maple for Stained Cabinets

Click on a colour chip for a larger view. The colours shown are for reference purposes only. They have been reproduced using digital production techniques. Always test stain on a hidden area of the wood to verify desired colour. Minwax® Wood Finish™. Natural 209. [x] Minwax ® Wood Finish™. Natural 209 Our maple stain colors are available on stair treads, risers, and stair parts so you know longer have to worry about the messy and time consuming process of staining and finishing your treads by hand. All of our maple treads are finished with our specialty aluminum oxide finish, which will preserve the bold color of your stairs for decades to come

Paint Grade Hard/Soft Maple Wood Species Description forNorth American Hardwoods from Kretz Lumber

Stain - a discoloration in wood that may be caused by micro-organisms, metal, or chemicals. Stain Blue sapstain - fungal Chemical - modification / concentration extractives Iron tannate - often oak, caused by wet wood contacting iron • Maple-Soft & Hard • Oak Sapwoo Ambrosia Maple. The Ambrosia beetle causes the wormy pattern in Soft Maple lumber and the result is very unique looking lumber. The wood has beautiful brown and gray stripes with small worm holes. This lovely wormy pattern will not effect the final performance of the lumber in any negative way. We sort this lumber by hand for the best looking. Maple. Like ash, there are two types of maple: 'hard' and 'soft'. Also known as 'eastern maple' and 'sugar maple', hard maple used in guitar construction is harvested mostly in the northeast USA and Canada. It's known for being a hard and heavy wood that's the wood of choice for bowling pins and butchers blocks Most common wood species — pine, birch, maple and cherry — absorb stain unevenly. For a more consistent finish, apply a pre-stain conditioner. Step 16. Start with High-Gloss Poly. A few coats of semigloss or satin polyurethane look like a sheet of dull plastic over the wood. So build up coats of gloss poly first